Product Description
Power 10" T1 2-Ohm DVC SubwooferT1D210
Innovative technologies allow the T1D210 subwoofer to perform like a larger woofer over the previous model. The T1 10” features dual 2-Ohm voice coils, 600 Watts RMS power handling, and includes a grille with integral trim ring.
The Power Series T1D210 Dual 2-Ohm subwoofer builds on innovative new Rockford Fosgate technologies. These bad boys have patented VAST technology that increases surface cone area up to 25% so the T1D210 performs like a much larger woofer over the previous model. The new FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech and ready to set off car alarms, the T1D210 is here!
FEATURES AT A GLANCE
- Symmetrical dual progressive roll tear resistant poly-cotton spiders
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Optimized and matched magnetic and complicance geometry
- Periodic-stitched fatigue resistant tinsel lead wire
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Anodized aluminum heat sinking dust cap
- Kevlar fiber reinforced paper cone
- Rigid die-cast aluminum basket
- Optimized pole piece and spider venting
- Anodized aluminum voice coil former / copper clad aluminum wire
- 1 Year Warranty
1200 Watts Max
Available Wiring Diagrams
Please consult your amplifier owner's manual for lowest recommended impedance.
Wiring Diagram #1
Wiring Diagram #2
Wiring Diagram #3
Wiring Diagram #4
Wiring Diagram #5
Wiring Diagram #6
Wiring Diagram #7
Wiring Diagram #8
Wiring Diagram #9
Sealed Recommended Design
This is the optimum recommended sealed woofer enclosure and replicates the optimum enclosure listed in the owner's manual. You may notice slight differences between online information and the owner's manual due to continual improvement on usage of our products.
- All sides use 3/4" (18mm thick MDF)
- All box dimensions are external
- Dimensions above include Vb + woofer displacement
| Measurements | Standard | Metric | ||||||
|---|---|---|---|---|---|---|---|---|
|
Vb (Gross)
|
0.75 cu. ft. | 0.75 Liters | ||||||
|
F3
|
47.50 Hz | |||||||
|
Qtc
|
0.73 | |||||||
|
Height |
14.00 in. | 14.00 cm | ||||||
|
Width |
16.75 in. | 16.75 cm | ||||||
|
Depth |
9.00 in. | 9.00 cm | ||||||
|
Spk. Cutout
|
9.06 in. | 230.00 cm | ||||||
|
Spk. Depth
|
6.38 in. | 6.38 cm | ||||||
|
Vd
|
0.08 cu. ft. | 2.20 Liters |
EXPORT
Vented Recommended Design
This is the optimum recommended vented woofer enclosure and replicates the optimum enclosure listed in the owner's manual. You may notice slight differences between online information and the owner's manual due to continual improvement on usage of our products.
- All sides use 3/4" (18mm) thick MDF
- All box dimensions are external
- Dimensions above include Vb + woofer/port displacement
- Port diagram for reference only and may require alternate placement.
- An infrasonic filter is required for reliable performance in vented designs.
| Measurement | Standard | Metric |
|---|---|---|
|
Vb (Gross)
|
1.50 ft. | 1.50 Liters |
|
F3
|
31.60 Hz | |
|
Fb |
40.10 Hz | |
|
Height |
15.50 in. | 15.50 cm |
|
Width |
20.25 in. | 20.25 cm |
|
Depth |
12.50 in. | 12.50 cm |
|
Np |
1.00 port | |
|
Dp
|
4.00 in. diameter | 4.00 cm diameter |
|
Lp |
11.00 in. long | 11.00 cm long |
|
Spk. Cutout
|
9.06 in. | 230.00 cm |
|
Spk. Depth
|
6.38 in. | 6.38 cm |
|
Vd
|
0.08 cu. ft. | 2.20 Liters |
|
Vp
|
0.08 cu. ft. | 2.265 Liters |
EXPORT
Infinite Baffle Design
Do Not Use Infinite Baffle
This woofer is not recommended for Infinite Baffle; it is optimized for the design(s) above.
If you require this type of design, here are some recommendations:
- Select another Woofer Family (M1, M2, etc).
- Select another Woofer Series (Prime, Punch, etc).
- Select another Woofer Size (10", 12", etc).
