Product Description
Strengthen Your Steering
Your Can-Am Defender is your most important tool throughout the workday. But the worn-out rack makes every job harder. You need something better: SuperATV’s Can-Am Defender HD10 RackBoss 2.0 Rack and Pinion. It uses our patented X24 Tech with bushings at both ends of the rack to reduce wear by over 50% compared to stock. With RackBoss 2.0 installed, you get long-lasting performance you can count on.
Revolutionary X24 Tech and Dual Bushings
We use a dual PTFE bushing design to prevent the wear and tear you’re used to. Thanks to our X24 Tech, which uses tough bushings at both ends of the rack, RackBoss 2.0 can power through bigger hits with larger tires without wearing out fast. You get like-new operation that lasts longer than any other Defender steering rack. Plus, the built-in grease fittings allow you to push out all the crud that gets in when you go hard in mud or water. It’s only possible with RackBoss 2.0.
Enhanced Swaged Tube Tie Rods
Our steel swaged tube tie rods are perfect for optimal strength without adding a ton of weight. The swaged design significantly enhances the durability of the 7/8” diameter tubing. These tie rods feature 16 mm inner ball and sockets and 14 mm outer tie rod ends, ensuring maximum strength in critical areas. If you’re a casual rider seeking improved performance over your stock setup, these are the tie rods you need.
WARNING: This product can impact machine operation. Customer and/or user is responsible for ensuring that this product is compatible with their machine as currently configured, properly installed, and understands any impact this product has or might have on the machine's operation.
⚠ California Proposition 65 Warning ⚠
WARNING: This product may contain a chemical known to the State of California to cause cancer or birth defects or other reproductive harm.
Heavy-duty dual PTFE bushings:
Designed with our patented X24 Tech
Prevents wear
Reduces slop
Improves overall durability
Swaged tube tie rods use:
14 mm outer tie rod ends
Rebuildable inner tie rod ends that use 3/4” rod threads and 16 mm rack threads
65% larger housing than stock
Over 50% less wear than OEM after 15,000 cycles
Grease fitting for rack gears
FITMENT
Can-Am Defender HD 10 : 2016+
Can-Am Defender HD 10 DPS : 2016+
Can-Am Defender HD 10 XMR : 2018+
Can-Am Defender HD 10 XT : 2016+
Can-Am Defender HD 10 XT Cab : 2018+
Can-Am Defender HD 10 XTP : 2018+
Can-Am Defender HD 10 Mossy Oak : 2020+
Can-Am Defender HD 10 Pro : 2020+
Can-Am Defender HD 10 6x6 : 2020+
Can-Am Defender Limited : 2020+
Can-Am Defender MAX HD 10 DPS : 2017+
Can-Am Defender MAX HD 10 XMR : 2019+
Can-Am Defender MAX HD 10 XT : 2017+
Can-Am Defender MAX HD 10 XT Cab : 2018+
Can-Am Defender MAX Limited : 2020+
Can-Am Defender MAX Lone Star Edition : 2018+
