Product Description
Power 400 Watt 4-Channel AmplifierT400-4
The Power T400-4 is a 4-channel amplifier capable of producing 100 Watts into each of its four channels at 2-Ohms. The T400-4 can run a 4-way full-range system or use component speakers on the front with subwoofers on the rear.
Cta-2006 Compliant
Number of Channels
4
Total Power
(Sum of Rated Power)
(Sum of Rated Power)
400 Watts RMS
Rated Power
(RMS Continuous Power)
(RMS Continuous Power)
60 Watts x 4 @ 4-Ohm
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable
100 Watts x 4 @ 2-Ohm
200 Watts x 2 @ 4-Ohm Bridged
2-Ohm x 2 Bridged Stable
Dynamic Power
(PVC/PowerCube®)
(PVC/PowerCube®)
84 Watts x 4 @ 4-Ohm 0° Res
139 Watts x 4 @ 2-Ohm 0° Res
272 Watts x 2 @ 4-Ohm Bridged
139 Watts x 4 @ 2-Ohm 0° Res
272 Watts x 2 @ 4-Ohm Bridged
Bridgeable
Yes
Frequency Response
20Hz to 20kHz +/- 1dB
Input Sensitivity
150 mV to 4 V
Circuit Topology Class
Class A/B
Efficiency (average)
69% @ 4-Ohm
68% @ 2-Ohm
68% @ 2-Ohm
Total Harmonic Distortion (THD+Noise)
4-Ohm: <1.0%
2-Ohm: <1.0%
2-Ohm: <1.0%
Signal Input
Front Low level: 1 RCA pair
Rear Low level: 1 RCA pair
Input Switch: 2CH / 4CH
Rear Low level: 1 RCA pair
Input Switch: 2CH / 4CH
Signal Output
n/a
Tone Controls
Front Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Rear Channels - Punch EQ
Treble: 0dB to +12dB @ 12kHz
Bass: 0dB to +18dB @ 45Hz
Crossover Controls
Front High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Front Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Rear High-Pass (HP): 50-500Hz 24dB/octave Butterworth
Rear Low-Pass (LP): 50-500Hz 24dB/octave Butterworth
Remote Controls
Optional Remote Punch EQ
(overrides rear channel built-in Punch EQ)
(overrides rear channel built-in Punch EQ)
Visual Indicators
Power
Thermal
Protect
Thermal
Protect
Power Wire Gauge
8 AWG to 4 AWG
Power Input Connector
Block
Speaker Wire Gauge
8 AWG to 18 AWG
Speaker Output Connector
Screw terminal barrier strip
Cooling
Convection
Heatsink
Operating Voltage
9 - 16 VDC
Recommended Fuse
(not included)
(not included)
60 A
Average Current Draw (13.8V Music)
30 A
Max. Current Draw (13.8V Sinewave)
60 A
Suggested Alternator
75 A
Included In The Box
Dimensions (H x W x D)
2.14 x 8.14 x 13.66 (in)
5.42 x 20.68 x 34.69 (cm)
5.42 x 20.68 x 34.69 (cm)
Shipping Weight
11.90 Lbs. (5.39 Kg.)
